kubli-racing

 GTP-A8 (Balance charger/discharger)

1/8 Buggy SQ-Tire (2) w/ Soft Molded Insert

Proven tread pattern with tons of forward bit, molded with high traction rubber material, comes with long lasting molded insert, great cornering consistency

28 Engine cylinder/piston/connection rod set(assm)

The next generation of high-performance brushless motors are here! Introducing the new Fantom ION Pro Brushless racing motors. These motors are built for racing and represents the latest in R/C brushless motor technology. The Fantom ION Pro Brushless motors are setting the new standard for Power, Efficiency, Reliability & Performance!

Check out these features...

• Sintered Neodymium Magnet Rotor - Produces huge power and high efficiency. Also, the sintered design provides increased strength and durability to withstand the heat and rpm stresses of racing.
• Multi-strand Heavy Gauge Wire - Combined with the sintered neodymium magnet rotor, this combination produces the ultimate power and efficiency required for today's high level racing.
• Sensored or Sensorless Operation - The ION runs sensored or sensorless, and is compatible with all popular racing speed controls.
• Generous Cooling Slots & Internal Cooling Fan - Helps keep motor cool under the stresses of competition. A cool motor also runs more efficiently, which means longer run time and maximized power throughout the run.
• Adjustable Timing - Provides fine-tuning for all racing conditions.
• Dual Ball Bearings - For maximum rpm and smooth operation.
• Includes sensor cable.
• Available in all popular winds.
• Meets ROAR and EFRA specifications.

RECOMMENDED FOR: 4WD & Truck Off-Road

6.5 TURN ION PRO BRUSHLESS MODIFIED MOTOR

The next generation of high-performance brushless motors are here! Introducing the new Fantom ION Pro Brushless racing motors. These motors are built for racing and represents the latest in R/C brushless motor technology. The Fantom ION Pro Brushless motors are setting the new standard for Power, Efficiency, Reliability & Performance!

Check out these features...

• Sintered Neodymium Magnet Rotor - Produces huge power and high efficiency. Also, the sintered design provides increased strength and durability to withstand the heat and rpm stresses of racing.
• Multi-strand Heavy Gauge Wire - Combined with the sintered neodymium magnet rotor, this combination produces the ultimate power and efficiency required for today's high level racing.
• Sensored or Sensorless Operation - The ION runs sensored or sensorless, and is compatible with all popular racing speed controls.
• Generous Cooling Slots & Internal Cooling Fan - Helps keep motor cool under the stresses of competition. A cool motor also runs more efficiently, which means longer run time and maximized power throughout the run.
• Adjustable Timing - Provides fine-tuning for all racing conditions.
• Dual Ball Bearings - For maximum rpm and smooth operation.
• Includes sensor cable.
• Available in all popular winds.
• Meets ROAR and EFRA specifications.

Asso 1/8 Factory Team RC8T Truggy Kit

• Factory assembled shocks, diffs and turnbuckles.
• Factory Team shock and diff fluids included
• Factory Team Aluminum Top Plate and Steering Rack for the ultimate truggy durability
• Factory Team chassis braces with integrated center stiffener that maintains chassis integrity
• 4mm woven carbon fiber shock towers
• Blue aluminum wheel hexes featuring captured drive pins and nyloc wheel nuts
• 4.30:1 gear ratio
• Free Float Caliper brake-system eliminates the possibility of unwanted brake drag while on throttle
• Two-piece split-center diff mount allows quick and easy access
• Wing angle and position is fully adjustable
• High-torque capacity three-shoe aluminum clutch
• Full CVAs with captured CVA pins
• Full ball bearing drivetrain and steering
• Metric alloy hardware throughout
• Milled 3mm black hard-coated 7075 aluminum chassis
• Factory Team blue titanium turnbuckles

Type: Off-Road Nitro Truggy
Scale: 1/8
Length: 571.5mm
Width: 419mm
Wheelbase: 375mm
Weight: 3946g (no RX pack or body)
Chassis: 3mm black hard-coated 7075 aluminum
Drive Train: 4WD
Kit/RTR: Kit
Ball Bearings: Rubber sealed bearings
Is Assembly Required: Yes

• ABC-Laufgarnitur (Aluminium, Bronze, Chrome Konstruktion)
• Zusammengesetzter 3-Nadel Schiebevergaser
• Zuverlässig arbeitender Seilzugstarter
• 8 Kanal Design
• Austauschbare Venturi-Einsätze am Vergasereinlass
• Turbo Brennraum optional erhältlich
• 11 Kühlrippen großer Motorkühlkopf für perfekte Motorkühlung
• SG Kurbelwelle mit großem Einlaßfenster
• Spezielles Laufbuchsendesign für optimale Strömung und max. Leistung
• Motorkopf in Grün und Grau erhältlich
• inkl. Standard Glühkerze 5

Axial 32 Spec 1s (green)

This is a direct bolt-in replacement engine for any .21+ engine mount, and will accept most aftermarket shaft drive starting systems.

Balancer board

3 Versionen JST / PQ / TP

Brushless Analysis

*Motor Checker (Brushless motor)
*Brushless Analysis (Motor and ESC)
*ESC Update and Setting for Speed Passion Esc series
*USB upgradeable (for Brushless Analysis feature)

Cat SX - LiPo Phil Booth Signature Version (Assembled)

Cat SX - LiPo Phil Booth Signature Version - These cars are fully assembled in England by Schumacher Staff under the expert guidance of legendary builder of champions cars Phil Booth. Phil assembled the original Cat that took Masami Hirosaka to World Championship fame as a youg man and has been building winning cars ever since. These cars come with Phil Booth set up and ready to win so make a perfect gift for any aspiring champion. Body still requires painting to your own design plus installation of the electronics of your choice. Cars include race springs and Speed Secret option parts for suspension geometry so are ready to win with no further option parts.

CAT SX S1 Composite (Assembled)

spray the body to your own design. The S1 Composite material is extremely tough and has the same look as Carbon Fibre but is a little more flexible so offers easier handling while being easier to set up.

The S1 CAT SX includes S1 material set rather than C/F & also tough steel turnbuckles.

Exige 2.0 Brushless System

bis Motoren mit 7.5T

Grösse 31.5*27.5*24.5mm

GM-GENIUS 90 BRUSHLES

GM-GENIUS SPORT 80 R BRUSHLESS

GM-GENIUS Sport 80R für 1:10 Auto- und Schiffsmodelle.
Besonders preisgünstige Brushless-Regler Einfache Programmierung der Senderwege Beiliegende Programmierkarte für eine einfache Programmierung der Zusatzfunktionen:

Max. Bremsstärke: 0%, 20%, 40%, 60%, 70%, 80%, 90%, 100%.
Automatikbremse: 0%, 5%, 10%, 15%, 20%, 25%, 30%, 35%.
Softanlauf: sehr soft, soft , Standard, schnell, sehr schnell.
Startleistung: sehr soft, soft, Standard, stark, sehr stark.
Max. Rückwärtsfahrt: 0%, 20%, 40%, 60%, 70%, 80%, 90%, 100%.
Fahrtmodus: nur vorwärts/Bremse, vorwärts/Bremse/rückwärts, vorwärts/Sicherheitsbremse/rückwärts (Werkseinstellung), vorwärts/Bremse/nach 1s rückwärts, vorwärts/Bremse/nach 1s rückwärts mit Sicherheitsbremse (Die Sicherheitsbremse bremst den Motor, bis dieser still steht).
Motor Timing: Automatisches Motortiming, soft Timing, Standard Timing, hohes Timing.
Batteriemanagementsystem: NiCd/NiMH 4,5 V Abregelspannung,NiCd/NiMH 4,2 V Abregelspannung, NiCd/NiMH 3,9 V Abregelspannung, LiPo/LiIo mit hoher Abschaltspannung 2,9-3,2 V, LiPo/LiIo mit Standard Abschaltspannung 2,6-2,9 V, LiPo/LiIo mit niedriger Abschaltspannung 2,3-2,6 V

GTP-A6 (Balance charger/discharger)

GTP-A6-10 (Balance charger/discharger)

 GTP-V5 (Balance charger)

High Down Force 1:8 Buggy/Truggy Wing

Illuzion - 1/8th Buggy / Truggy wing

LapCountSystem mit 3 Transponder

Speziell geeignet und entwickelt wurde sie für den Einsatz in Mini-RC-Cars 1:18, 1:24 und 1:27 (Mini-Z).
Mit dem extrem kleinen und leichten Transponder besitzt jedes Modellauto automatisch eine weltweit einzigartige Identifikationsnummer. Fährt ein so ausgestattetes Fahrzeug über die Start/Ziellinie, wird das Transpondersignal mit der Identifikationsnummer vom Empfängermodul in der Zeitnahmebrücke erkannt und ausgewertet.
Die Rundenzählanlage kann beliebig viele Transponder gleichzeitig erfassen, und zwar unabhängig von der Anzahl der auf der Brücke montierten Empfängermodule. Die Anzahl der benötigten Empfängermodule hängt viel mehr von der Streckenbreite unter der Brücke ab. Die mitgelieferte Software kann in Verbindung mit einem PC, sofort für Trainingsläufe verwendet werden.

Features
» Rundenzählanlage für alle RC-Modelle in allen Maßstäben
» Für Außen- und Hallenstrecken geeignet
» Beliebig viele Fahrzeuge können gleichzeitig erfaßt werden
» Personal Transponder mit einzigartigen Identifikationsnummern
» Extrem kleiner (nur 12x15x6mm) und leichter Transponder (3g)
» Software für alle gängigen Windows Plattformen

LAP COUNTER SET
Bestehend aus 3 Personal Transponder, 4 Empfängermodule mit Flachkabel, PC-Interface mit Datenkabel und RCM-Software
RS160 Lap Counter Set
RS163 Personal Transponder
RS164 Empfänger Modul
RS165 PC-Interface
RS166 Ersatzkabel f. Empfänger Modul
RS167 PC-Interface Kabel

LiIo-Nano. Akku A1232S2P 4600 6,6V G3,5

Lipo 5100 7.4Volt 5100mAh 35C SaddlePack

von EnrichPower

Lipo 7.4V 4000mAh 33C  discharge with hard case

mit Anschlusskabel

Lipo 7.4V 5000mAh 33C discharge with hard case

Lipo 7.4V 5200mAh  28C discharge with hard case

mit Anschlussbuchsen

Lipo battery protective

klein: 22*18cm 80g

 LiPo battery protective

gross: 30*22.5cm 123g